Submit your papersSubmit Now
For Enquiries: [email protected]
IIARD LogoIIARD

CFD Investigation of The Hydrodynamic, Thermal, and Energy Characteristics of a Microchannel Biodiesel Reactor

Nwakwuribe, V C, Ugwu, H U, Obi, A I

Abstract

This study addresses the tendency of biodiesel reactor research to treat flow, heat transfer, and energetics separately, despite reactor efficiency depending on their coupled behaviour. Transient CFD simulations of an improved microchannel reactor were performed in ANSYS Fluent using a pressure-based coupled solver, with the methanol feed and oil introduced at 0.70 m/s and 1.20 m/s and inlet temperatures of 318 K and 333 K under laminar conditions (Re < 2300), after assessing mesh quality and confirming time-step independence. Results showed the combined velocity of the bio-oil and methanol feed streams after merging accelerated to 2.97 m/s within the microchannels tube, with slight recirculation in the settling chamber. Local pressure ranged from 3.7 to 11.3 kPa with an overall pressure drop of 2.56 kPa, while a thermal uniformity of 333 K was maintained within the reactors preheating chamber and microchannel tube. The Internal energy spanned from 53,530–59,890 J/kg in reactive zones but the lowest internal energy of −41,890 J/kg was recorded in the methanol feed inlet tube. Validation against experimental data gave errors of 2.69% (temperature), 2.66% (pressure drop), 2.62% (velocity), and 1.60% (Biodiesel yield), all within the 5% threshold. The results demonstrate the applicability of the CFD framework to the investigated microreactor configuration and provide a basis for further design optimization and scale-up studies.

Keywords

Biodiesel productionMicrochannel reactorComputational fluid dynamicsANSYS Fluent simulation

References

Awogbemi, O., Ojo, A. A., & Adeleye, S. A. (2024). Advancements in the application of metal oxide nanocatalysts for sustainable biodiesel production. Discover Applied Sciences, 6(5). https://doi.org/10.1007/s42452-024-05920-3 Du, X., Liu, M., & Sun, Y. (2022). Optimization of the internal circulating fluidized bed using computational fluid dynamics technology. Fluid Dynamics & Materials Processing, 18(2), 303–312. https://doi.org/10.32604/fdmp.2022.016242 Farouk, S. M., Tayeb, A. M., Abdel-Hamid, S. M. S., & Osman, R. M. (2024). Recent advances in transesterification for sustainable biodiesel production, challenges, and prospects: A comprehensive review. Environmental Science and Pollution Research, 31(9), 12722– 12747. https://doi.org/10.1007/s11356-024-32027-4 Horta, A. A., Ferreira, L. O. S., Martinez, E. L., & Filho, R. M. (2014). Simulation of the alcohol-oil mixture in a T-shaped microchannel using the dissipative particle dynamics method on GPU devices. Revista de Engenharia Térmica, 13(1), 65. https://doi.org/10.5380/reterm.v13i1.62072 Huchet, F. (2011). Flow and mass transfer inside networks of minichannels. In InTech eBooks. https://doi.org/10.5772/15272 Kadivar, M., Tormey, D., & McGranaghan, G. (2022). CFD of roughness effects on laminar heat transfer applied to additive manufactured minichannels. Heat and Mass Transfer, 60(12), 1915–1929. https://doi.org/10.1007/s00231-022-03268-1 Kushaari, K., Laziz, A. M., & Hamid, N. H. (2019). Quantitative analysis of interfacial area on liquid-liquid multiphase flow of transesterification process in cross-junction microchannel reactor. Journal of Engineering and Technological Sciences, 51(4), 585– 596. https://doi.org/10.5614/j.eng.technol.sci.2019.51.4.9 Laziz, A. M., Kushaari, K., Chin, J., & Denecke, J. (2019). Quantitative analysis of hydrodynamic effect on transesterification process in T-junction microchannel reactor system. Chemical Engineering and Processing: Process Intensification, 140, 91–99. https://doi.org/10.1016/j.cep.2019.04.019 Majnis, M. F., & Jalwan, M. R. (2019). Numerical investigation on multiphase flows in various configurations of microchannels using computational fluid dynamics. ASEAN Journal of Chemical Engineering, 17(1), 82. https://doi.org/10.22146/ajche.49568 Meral, Z. K., & Parlak, N. (2021). Experimental research and CFD simulation of cross flow microchannel heat exchanger. Journal of Thermal Engineering, 7(2), 270–283. https://doi.org/10.18186/thermal.872366 Odumosu, O. A., Li, H., Wang, T., & Che, Z. (2024). Conjugate heat transfer effects on bubble growth during flow boiling heat transfer in microchannels. Physics of Fluids, 36(12). https://doi.org/10.1063/5.0242693 Osman, A. I., Nasr, M., Farghali, M., Rashwan, A. K., Abdelkader, A., Al-Muhtaseb, A. H., Ihara, I., & Rooney, D. W. (2024). Optimizing biodiesel production from waste with computational chemistry, machine learning and policy insights: A review. Environmental Chemistry Letters, 22(3), 1005–1071. https://doi.org/10.1007/s10311- 024-01700-y Ren, Y., Lv, B., & Ran, Z. (2025). Application of computational fluid dynamics optimized biomimetic microchannel liquid-cooled plates in battery thermal management systems. Journal of Applied Fluid Mechanics, 19(2). https://doi.org/10.47176/jafm.19.2.3810 Rohaizan, M. H. K. M., Sidik, N. A. C., & Shameli, K. (2024). Numerical analysis of heat transfer in microchannel heat sink using flow disruption. Journal of Advanced Research Design, 106(1), 1–14. https://doi.org/10.37934/ard.106.1.114 IJEMT Sandoval, M. A., Fuentes, R., Walsh, F. C., Nava, J. L., & De León, C. P. (2016). Computational fluid dynamics simulations of single-phase flow in a filter-press flow reactor having a stack of three cells. Electrochimica Acta, 216, 490–498. https://doi.org/10.1016/j.electacta.2016.09.045 Widyaparaga, A., & Pranowo. (2013). Simulation of conjugate convective-conductive heat transfer in a microchannel within the slip regime using GPU accelerated lattice Boltzmann method. In Proceedings of the ASME 11th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM2013) (Paper V001T12A009). https://doi.org/10.1115/ICNMM2013-73133